Casals Kuvio 200 — helico-centrifugal inline duct fan 1,135 m³/h for concealed ceiling installation
Available in stock
Casals Kuvio 200 helico-centrifugal inline duct fan — 1,135 m³/h maximum airflow, Ø200 mm circular duct connection.
Mixed flow (helico-centrifugal) design combines the high airflow of axial fans with the higher static pressure of centrifugal fans — suitable for medium-length duct runs.
Concealed installation inside ceiling void or technical space. UV-resistant ABS, self-lubricating bearings, thermally protected motor, 230V monophase.
Quick Buy
-
KUV200
-
4.640 Kgs
The Casals Kuvio 200 is a helico-centrifugal inline duct fan delivering 1,135 m³/h through a Ø200 mm circular duct. The helico-centrifugal (mixed flow) design is the key technical feature: it combines the impeller geometry of axial fans — which move large volumes of air efficiently — with a centrifugal component that generates meaningfully higher static pressure than a pure axial fan of the same diameter. This makes the Kuvio 200 the correct choice when an inline installation must overcome not just the resistance of a short exhaust termination but the cumulative resistance of a medium-length duct run with bends and fittings.
When to choose an inline fan over a wall-mounted extractor
A wall extractor mounts directly through the exterior wall — simple, but only possible when the room borders an exterior wall and aesthetics permit a visible extraction point. The Kuvio 200 installs inside the duct run, concealed within the ceiling void or a technical space, and can be positioned at any point along the duct. This makes it the preferred solution for: interior rooms with no exterior wall access; spaces where the exhaust must be ducted a significant distance before reaching the exterior; multi-room extraction on a single duct trunk; commercial installations where a single concealed fan serves multiple zones.
Airflow and static pressure capability
At 1,135 m³/h the Kuvio 200 handles ventilation for larger spaces or multiple rooms simultaneously — equivalent to approximately 8 air changes per hour in a 140 m² open-plan space at 3 m ceiling height, or extraction for several smaller rooms sharing a common duct trunk. The mixed flow design ensures this airflow is maintained as duct resistance increases, unlike pure axial fans whose output drops steeply with back-pressure.
Installation
Mounts directly on Ø200 mm circular ductwork, inserted in line within the duct run. The fan body installs within the ceiling void or a technical enclosure with access panel for maintenance. Horizontal or vertical duct connection. 230V single-phase supply.
👉 In-line fans — full range 👉 Airflow calculator — size your installation 👉 Pressure drop calculator — check duct resistance 📞 +40 722 667 239
-
PRODUCER:CASALS
-
Air flow:260 m3/h
-
Suction size:100 mm
-
Motor type:AC motor
-
Voltage:220/240 V - 50 Hz
-
Motor speed:2 POLE
-
Mounting:Duct
| File | Info |
|---|---|
commercial_-_acm_-_ps
|
[PDF, 250.98 KB] |
Sales

commercial_-_acm_-_ps