Sales
My account
View cart
Electronic speed controller ITRS 9-100 DT
Price excl. tax:
€16016
Price inc. tax:
€19059
Pre-order
Electronic fan speed controller 10A
Imax. : 10A
Power supply, Us 110—240 VAC / 50—60 Hz
Regulated output Umin—Us Maximum load depends on the version
Unregulated output Imax. 2 A
Minimum output 30—60 % of Us
Maximum output voltage, MAX 100 % Us
Kick start duration 8—10 s
Protection standard IP54 (according to EN 60529)
Temperature -20—35 °C
Ambient conditions: Rel. humidity 5—95 % rH (non-condensing)
• Automatic supply voltage detection
• Adjustable stepless output voltage
• Minimum speed adjustable by internal trimmer
• Illuminated on/off switch
Quick Buy
Just 4 fields to fill in
-
ITRS9100
-
0.650 Kgs
This variable speed controller controls single-phase motors with a maximum current of 10 A. The requested fan speed can be set via the potentiometer on the front. The supply voltage is 230 VAC. The minimum speed is adjusted via an internal trimmer. Kick start or soft start acceleration can be selected via a jumper. An illuminated ON-OFF switch is located on the side of the enclosure. This controller is typically used for variable speed control of AC fans or centrifugal pumps in HVAC applications. The fan speed is regulated by varying the motor voltage via phase angle control - Triac technology.
Easy to configure
This fan speed controller doesn't require configuration. Once connected, the fan speed controller is ready to use! If necessary, the minimum motor voltage can be adjusted via an internal trimmer.
Kickstart or softstart acceleration can be selected via a jumper.
Local AC fan speed control
The motor can be enabled or disabled via the illuminated on-off switch.
Motor speed can be selected via the potentiometer.
Unregulated output
The unregulated output (230 VAC) is active when the motor is enabled. It can be used to control an external run-indicator, a damper, etc.
E.g. when the fan is deactivated, the damper is closed. When the fan is active, the damper is open.
Unrivaled quality
This fan speed controller is manufactured in Europe using the most reliable and modern electronic components. It can control (multiple) motors with a total maximum current equal to its rated current.
L Power supply, line (110—240 VAC / 50—60 Hz)
L1 Unregulated output, line (230 VAC / Imax. 2 A)
N Neutral
U2 Regulated output to motor, neutral
U1 Regulated output to motor, line
PE Protective earth
Cable cross section max. 2,5 mm2
Connections Cable gland clamping range 5—10 mm
- Voltage:230 V - 50 Hz
| File | Info |
|---|---|
 ITRS 100 Fișă tehnică | [PDF, 5.71 MB] |
